Encoder Directly To A Pppoe - Samsung SPE-400 User Manual

CONNECTING THE NETWORK VIDEO ENCODER DIRECTLY
TO A PPPoE MODEM
Network Video Encoder
1. Connect the user PC directly with the network video encoder.
2. Run the IP Installer and change the IP address of the network video encoder so that
you can use the web browser on your desktop to connect to the Internet.
3. Use the Internet browser to connect to the web viewer.
4. Move to [Setup] page.
5. Move to [Network] – [DDNS] and configure the DDNS settings.
6. Move to [Network] – [Interface] Setup Page, set the network type to [PPPoE],
and enter the ID and password.
7. Connect the network video encoder, which was removed from your PC, directly to
the modem.
8. Restart the network video encoder.

M
For registering the DDNS settings, refer to "Registering with DDNS". (page 62)

For configuring the DDNS settings, refer to "DDNS". (page 61)

For setting the network type, refer to "Interface". (page 59)
INTERNET
PPPoE Modem
External Remote PC
DDNS Server
(Data Center, KOREA)
English _23