Sound And Voice Setup - Lowrance iWAY 250C Operation Instructions Manual

To disable Safety Mode and switch to Passenger Mode make sure the
vehicle is not moving. From the Options Menu choose
toggle whether the option is on or off. The button itself will show its
current state. A dialog like the one in the following image appears.
Choose to disable Safety Mode and return to the Options Menu.
Y
ES
WARNING:
When a GPS unit is used in a vehicle the vehicle operator
is solely responsible for operating the vehicle in a safe
manner. Vehicle operators must maintain full surveillance
of all pertinent driving conditions at all times. An accident
or collision resulting in damage to property, personal in-
jury or death could occur if the operator of a GPS-
equipped vehicle fails to pay full attention to travel condi-
tions and vehicle operation while the vehicle is in motion.
Do not attempt to configure, adjust or enter information
into your GPS unit while driving.

Sound and Voice Setup

Much of the information you will receive from the iWAY will come in
the form of sounds. Use the Sound and Voice Setup command to adjust
the type and frequency of audio output iWAY provides. From the Op-
tions Menu choose
To turn Key Press Sounds on and off: Tap the checkbox to the left
of the label
K
EY
To turn Voice Instructions on and off: Tap the checkbox to the left
of the label
V
OICE
off). If you turn off Voice Instructions, voice instructions can still be
accessed by pressing
instruction.
To adjust Periodic Voice instruction frequency: Press and drag
the blue button on the
crease the frequency of spoken instructions or to the left to decrease it.
Safety Mode disable menu.
S V
OUND AND
to check it (turn on) and uncheck it (turn off).
S
OUNDS
I
NSTRUCTIONS
SPEAK
P
ERIODIC
.
S
OICE ETUP
to check it (turn on) and uncheck it (turn
which will make iWAY state the current
slider. Drag it to the right to in-
V
OICE
38
to
S M
AFETY ODE