C A U T I O N
When using tools, always place handle
in upright position to raise vacuum to
highest carpet setting. Brush roll will
continue to turn when vacuum is turned
on and handle is in upright position.
Do not tilt vacuum forward while using
tools. To avoid damage, do not set
vacuum on carpet, carpeted stairs,
furniture or fringed rugs when using tools.
Reinsert wand into hose after
using accessories.
Turn air path selector knob to
When using accessories
'TOOLS' (Fig. 1).
Hose with wand
• Pull handle to release hose
(Fig. 2).
• Press power switch to turn
vacuum on (I) (Fig. 3).
• Pull out wand (Fig. 4).
• Attach tool to end of wand.
Stretch hose as needed (Fig. 5).
• Press button to reinsert wand
into hose (Fig. 6).
Use for baseboards, corners and furniture.
Crevice tool
Push crevice tool onto end of wand (Fig. 7).
Use for furniture, drapes and vents. Push
Dusting brush
dusting brush onto end of wand (Fig. 5).
(With some models or available for purchase)
Stair and upholstery brush
Use for furniture and stairs (Fig. 7).
Make sure vacuum is below you, pushed
against the bottom step (Fig. 8).
Eureka Customer Service HELPLINE 1-800-282-2886
How to use accessories
Fig. 1
Fig. 3
Fig. 7
Fig. 2
Fig. 4
Fig. 5
Fig. 6
Fig. 8
www.eureka.com
3