Map Auto Zoom; Map Data; Show Map Data - Lowrance Handheld Mapping GPS Receiver Operation Instructions Manual

4. Press to turn off the steering and speed boxes. The unit will now
EXIT
automatically "steer" along the trail or route. When you arrive at your
"destination," cancel navigation as you normally do.

Map Auto Zoom

This receiver has an auto zoom feature that eliminates much of the but-
ton pushing that other brands of GPS receivers force you to make. It
works in conjunction with the navigation features.
First, start navigation to a waypoint. (See the waypoint section for
more information on navigating to a waypoint.) Then, with the auto
zoom mode on, the unit zooms out until the entire course shows, from
the present position to the destination waypoint. As you travel toward
the destination, the unit automatically begins zooming in — one zoom
range at a time — always keeping the destination on the screen.
To turn this feature on, from the , press |↓ to
M P MENU A
AP AGE UTO
| . Repeat these steps to turn it off.
Z ENT
OOM

Map Data

This menu lets you turn the map off, if desired (which turns the map
screen into a GPS plotter); turn off or on the pop-up map info boxes;
draw the map boundaries or boxes around the areas of detail; or fill
land areas with gray. You can also turn on or off Map Overlays, which
display latitude and longitude grid lines or range rings on the map.
This menu lets you select Navionics Maps; for instructions, see the
Navionics Charts entry in this section.
To get to Map Data:
1. From the Map Page, press |↓ to | .
MENU M D ENT
AP ATA
Map Menu, left, Map Data Menu, right.

Show Map Data

Press |↓ to | . Press to enter the
MENU M D ENT ENT E M D
AP ATA ARTH AP ETAIL
selection list, and choose how much detail you want, from Off (so the
74