Cisco 1240AG Series Quick Start Manual page 30

• Web Server—This setting specifies the type of HTTP used to access the
access point using a web browser.
– Standard (HTTP)—Standard protocol used to transfer HTML using
unencrypted traffic between web browsers.
– Secure (HTTPS)—Protocol used to transfer secure data by using
encrypted traffic to and from the user by means of a Secure Socket
Layer (SSL).
• SNMP Community—The SNMP Community setting identifies and sets
attributes for the Simple Network Management Protocol (SNMP) used
to manage the network on which the access point resides.
– Read-Only—Access point allows only SNMP read access.
– Read-Write—Access point allows read and write access.
Note The following radio settings must be applied separately to each
radio: Radio0—802.11G and Radio1—802.11A.
•
Role in Radio Network—Determines what function the access point
performs in the wireless network.
– Access Point—Specifies that the unit operates as an access point
connected to the main Ethernet LAN network. In this mode,
wireless clients associate to the access point.
30
OL-16714-01