Cisco 1240AG Series Quick Start Manual page 23

5. Set the power settings and power injector fields, and verify your switch
status as shown in the power settings table.
Note
To verify switch status, you need to use the switch CLI. See the
Cisco IOS software configuration guide for your switch.
.
Power Source
Cisco PSE
supporting Cisco
Intelligent Power
Management feature
Cisco PSE not
supporting Cisco
Intelligent Power
Management feature
Quick Start Guide Cisco Aironet 1240AG Series Access Point
System Power Settings
Power Settings: Power
Negotiation selected
Power Injector: Unchecked
1
Power Settings: Prestandard
Compatibility selected
Power Injector: Unchecked
1
Switch Status
power inline
auto
power inline
auto
23