RIDGID R4513 Operator's Manual page 19

ASSEMBLY
TO CLOSE THE LEG STAND AND MOVE THE
SAW
See Figures 15 - 18.
 Remove any workpieces from the tool.
 Remove and securely store any tools or accessories such
as rip fence, miter gauge, clamps, blade guard, etc.
 Lower the saw blade.
To close the leg stand:
 At the same time, step on the release lever, grasp the
grips, and lift the grips up and away from the body.
 Push the table saw until the release lever clicks and locks
into place.
To move the leg stand:
 Holding the grips firmly, pull grips toward you until the
leg stand and saw are balanced on the wheels.
 Push the saw to the desired location then either open
the leg stand for saw operation or store the saw in a dry
environment.
RELEASE
LEVER
Fig. 15
19
Fig. 16
Fig. 17
Fig. 18