Table of Contents
Advertisement
FUTABA 9Z
V
Figure 70 Lever up PCB panel
5.
Once the LCD panel is out you can flip it over backwards, carefully pulling the two
ribbon cables you undid in Step 1 through the case. It will still be retained by some
ribbon cables so be careful (see Figure 72).
Figure 71 LCD Panel now completely removed (retaining plate/lugs on top)
WARNING: THE INFORMATION IN THIS MANUAL IS FOR INFORMATION PURPOSES ONLY AND MAY BE INCORRECT, CAUSE DAMAGE
TO YOUR RADIO OR INJURY TO YOURSELF AND OTHERS. IF YOU USE THIS MANUAL YOU DO SO SOLEY AT YOUR OWN RISK.
THE UNOFFICIAL WORKSHOP MANUAL
Page 70 of 84
www.jamesandtracy.co.uk
Copyright 2012 jamesandtracy.co.uk
Advertisement
Table of Contents
