403020.qxp_Layout 1 28/10/2014 09:24 Page 7
Using Your Easy Blend Juicer
WARNING: Ensure your Easy Blend is
unplugged from the mains before use.
Attach the Blade Lid to the Main Unit (6).
Align the open padlock and arrow and twist
to lock into place.
Attach the Juicer Lid (2). Twist clockwise to
lock, aligning the grate with the spout of the
Jug. The Juicer Lid will not fit the Jug
correctly if the Filter is not properly inserted.
1
Ensure the Safety Seal
in the Blade Lid (10). Attach the Blade Lid to
the Jug
(5)
Screw to fix into place securely.
3
Insert the Filter
frame with the lines in the Jug. The four lines
on the inside of the Jug will line up with the
four cut-outs on the base of the Filter.
5
Plug into the mains. Turn the Speed Control
to High (II).
(11)
is fitted correctly
(3)
into the Jug. Align the black
2
4
6
(7)
7