Server
Details
• Enable
this
Server – Select to enable.
• Server
Name – Create a name for this server. Only letters, numbers, and underscores are allowed.
• Enable
GPS server
on
LAN – Enables a TCP server on the LAN side of the firewall, which will periodically send GPS sentences to connected
clients.
• Enable
GPS server
on
WAN – Enables a TCP server on the WAN side of the firewall, which will periodically send GPS sentences to connected
clients.
• Port – Choose a port between 1 and 65535.
COR IBR1100 Series models include additional GPS options, including a choice between NMEA sentences and TAIP sentences. Select one of
these in the Choose
Language field.
NMEA
• Include
System
ID – Include the router's "System ID" sentence with every data message. This can be useful when a single remote client is
handling NMEA position reports from multiple routers. This creates a custom GPS sentence with the System ID as part of the sentence and
the checksum.
• Prepend
System
ID – Include the router's "System ID" sentence with every GPS message. This can be useful when a single remote client
is handling GPS position reports from multiple routers. This simply prepends the system id and a comma ahead of the GPS sentence.
• Report
NMEA GGA sentences – Report GPS fix using NMEA GGA sentence format (if available).
• Report
NMEA RMC sentences – Report GPS fix using NMEA RMC sentence format (if available).
• Report
NMEA VTG sentences – Report GPS fix using NMEA VTG sentence format (if available).
Depending on your selections (and other possible factors), reporting may include proprietary sentences. For example, if you select Include
System
ID, the report will include proprietary sentences of the following format (in addition to the standard sentences):
$PCPTI,{System ID},{router timestamp},{GGA timestamp},{GGA checksum}*{checksum}
"PCPTI" stands for Proprietary, CradlePoinT, Identification (P-CPT-I).
Figure 153: NMEA Settings
123