Table of Contents
Advertisement
DEFAULT WEATHER ALARM VALUES:
Pressure
Temperature (In or
Out)
Relative Humidity
(In or Out)
PRESSURE ALARMS:
1. In the normal display mode, press the ALARM button once.
The high-pressure alarm display will show.
2. Press and hold the SET button for about 2 seconds. The
pressure digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high-
pressure alarm value. Hold the arrow button in to change the
value faster.
4. Press the ALARM button to confirm the setting. The digit will
stop flashing.
5. Press the SET button to switch the alarm on or off. The ((())) icon indicates the alarm is
switched on.
6. Press the ALARM button once. The Low Pressure alarm
display will show.
7. Press and hold the SET button for about 2 seconds. The
pressure digit will flash.
8. Press the ▲/DATE button or ▼/RAIN button to set the low-
pressure alarm value. Hold the arrow button in to change the
value faster.
9. Press the ALARM button to confirm the setting. The digit will
stop flashing.
10. Press the SET button to switch the alarm on or off. The ((()))
icon indicates the alarm is switched on.
11. Press the ALARM button to move to the indoor temperature alarms.
INDOOR TEMPERATURE ALARMS:
5. Press the SET button to switch the alarm on or off. The ((())) icon indicates that the
alarm is switched on.
6. Press the ALARM button once. The low outdoor temperature alarm display will show.
Low
28.35 inHg
High
30.71 inHg
Low
32 F
High
104 F
Low
45%
High
70%
1. The high indoor temperature alarm display will show.
2. Press and hold the SET button for about 2 seconds. The
temperature digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the high
indoor temperature alarm value. Hold the button in to change
the value faster.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.
Wind gust
Wind Direction
Rainfall in 24
hours
High 62.0mph
North
High 1.96 in
P a g e
| 16
Advertisement
Table of Contents
