Panasonic VIERA TH-L42ET5A Operating Instructions Manual page 9

Et5z series and et5a series
Hide thumbs Also See for VIERA TH-L42ET5A:
Table of Contents

Advertisement

Adjusting the panel to your desired angle
Do not place any objects within the full rotation range.
Preventing the TV from falling over
This TV could fall over if it is pushed, pulled or knocked down.
We therefore recommend the TV is secured to the furniture as illustrated.
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in all
cases.
Band
Screw
Wood screw
Hanging the TV on the wall
Choosing to wall mount the TV shall be done at the owner's risk. Always use a qualified installer to perform a TV wall
bracket installation. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. Any such
damage will void your warranty.
Holes for wall-hanging
bracket installation
400 mm
400 mm
Rear of the TV
Warning
When optional accessories such as wall brackets etc. are used, always read and follow the manufactures installation
and usage instructions.
Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high
heat. Doing so may warp or damage plastic cabinet parts.
When installing wall brackets you must ensure the wall bracket is not electrically grounded to metal wall studs.
Always ensure that there are no electrical cables, pipes etc. in the wall before you begin the wall bracket installation.
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
(View from the top)
Securing to a furniture
Fix pedestal and
furniture together
with band.
This image is
for illustrative
purposes only.
Depth of screw:
minimum 10 mm
maximum 14 mm
Type of screw: M6
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
(View from the side)
15°
15°
Screw
Wood screw
Band
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents