Panasonic VIERA TH-L42ET5A Operating Instructions Manual page 29

Operating contents or the equipment with the TV remote control
You can operate the contents in Media Player / media servers, recording functions or the connected equipment.
How to change the code
Each type of the Panasonic equipment has its own remote control code.
Change the code according to the equipment you want to operate.
Press and hold during the following operations
Enter the appropriate code,
see table below
DVD Recorder, DVD Player, Blu-ray Disc Player
Player theatre, Blu-ray Disc theatre
Using USB HDD / SD Card Recording
Using in Video mode of Media Player
Using in Video mode of DLNA
The equipment using in VIERA Link
Note
●
Confirm if the remote control works correctly after changing the code.
●
The codes may be reset to default values if batteries are replaced.
●
Some operations may not be possible on some equipment models.
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track, title or chapter (not available for the
operation of USB HDD / SD Card Recording for ET5Z series)
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track, title or chapter (not available for the operation of
USB HDD / SD Card Recording for ET5Z series)
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Type of the equipment, features
VCR
Press
(p. 58)
(p. 60)
(p. 76)
(p. 85)
Code
70 (default)
71
72
73
29