Setting The Clock - Teac SL-D910 Owner's Manual

1 Press the CLOCK/TIMER button to display the
clock. (In AUX mode or standby mode, the clock
is already displayed.)
2
Press the TIME SET button.
"12 HR" or "24 HR" blinks on the display. If you
want to change the hour mode, press the .or/
button.
< When no button is pressed for 8 seconds, the timer
setting mode will be cancelled.
3 Press the TIME SET button again.
The "hour" value blinks.

Setting the Clock

CLOCK/TIMER
MEMORY/TIME SET
4 Press the SKIP button (. // ) to set the
current hour.
5
Press the TIME SET button.
The "minute" value blinks.
6 Press the SKIP button (. // ) to set the
current minute.
7
Press the TIME SET button.
The clock starts.
25