Before First Use; Using Your Stand Mixer - Morphy Richards Total Control User Manual

FP400015 MUK REV1.qxp_Layout 1 02/09/2015 10:30 Page 6

Before First Use

Before using your Stand Mixer for the first time,
clean the Bowl Cover
Guard (13) and attachments
soapy water. Dry thoroughly.
No parts are dishwasher safe.

Using Your Stand Mixer

Press the Head Release Lever
Head Unit (1). The Head Unit will lock in the
upright position. You will hear an audible click.
Place the Splash Guard
attachment (14),(15),(16). The Splash Guard
will fix into the two notches on either side of
the screw thread.
Press the Head Release Lever
the Head Unit (1)
in position. (You will hear an audible click and
the Lever will return).
6
(2) Mixing Bowl (3) Splash
(14),(15),(16) in warm
(4) and lift the
(13) onto the required
5
(4) and lower
pressing down until locked
Ensure the mains switch is in the on position '1'.
This is positioned on the side of the mixer, near the
mains cable entry point.
1
Place the Mixing Bowl
Bowl Locator (10). Twist anti-clockwise to lock
into place.
3
Place the attachment and Splash Guard into
the Attachment Socket (12). Rotate the
Attachment Sleeve
into place.
Add the ingredients to the Mixing Bowl (3).
Do not exceed the maximum quantity (1.5kg).
2
(3) into the recessed
4
(11) clockwise to secure
6