CONNECTIONS
● Connecting to the wireless network manually (Android)
Depending on the network environments, the product(s) may not be automatically
connected. In that case, you can set up the product manually to connect to the
network.
If the automatic setup fails, select the Manual.
1
After turning the product on, press and hold the
2
the back for 5 seconds.
WIFI SETUP
•
Wi-Fi SETUP
• The
button on the remote controller for 7 seconds.
• The product can wait for 2 minutes in its standby mode until the Wi-Fi
connection is established.
Wireless Router
Wi-Fi SETUP
SPK ADD
DC 24V
Wi-Fi SETUP
button
will appear on the product display window and a beep will sound.
feature will also activate by pressing down the
Power
connection
Wi-Fi SETUP
6
button located at
Anynet+