Foxconn P4M800P7MA series User Manual page 56

vPS2KB Wakeup Select
This option is used to select which action will wake up PS/2 keyboard from S3
/S4/S5 staus. Use <PgUp> or <PgDn> to select the desired item. The setting
values are: Hot key, Password.
vPS2KB Wakeup from S3/S4/S5
This option is used to select which hotkey will wake up by PS/2 keyboard from
S3/S4/S5 staus or disable it. The setting values are: Disabled, Ctrl + F1~F12,
Power, Wake, Any Key.
vPS2MS Wakeup from S3/S4/S5
This option is used to enable or disable the system to be waken up by PS/2
mouse from S3/S4/S5 staus. The setting values are: Disabled and Enabled.
vUSB Resume from S3
This option is used to enable or disable the USB to be resume from S3. The
setting values are: Disabled and Enabled.
vVGA
W hen on of VGA, any activity from one of the listed system peripheral
devices or IRQs wakes up the system.The setting values are: ON and OFF.
vLPT & COM
W hen on of LPT & COM, any activity from one of the listed system peripheral
devices or IRQs wakes up the system. If select "NONE", cannot wake up the
system. The setting values are: NONE, LPT, COM and LPT/COM.
44
IRQ/Event Activity Detect Menu
Chapter 3 BIOS Description