Sxs Slots - ARRI ALEXA User Manual

SxS Slots

43
On the SD card, the folder structure presented in the following example
should be created by the user prior to first use of the card.
Figure 27: Folder structure required for SD card
An unformatted SD card can be formatted with the camera. Go to
MENU>System>SD card>Format + prepare SD card. A screen will appear
and ask for confirmation of the format operation through a double press of
the two lower screen buttons. After formatting the card, the camera
automatically creates the required folder structure.
Note: Formatting the SD card will irreversibly remove all data on the SD card.
The correct folder structure can be created by the camera. Go to
MENU>System>SD card>Prepare SD card. The camera will create all
missing folders.
Firmware update files are recognized by the camera anywhere within the
structure, but are still recommended to be placed in the Firmware folder.
9.14 SxS Slots
On the camera's left side are two SxS PRO card slots. They are behind a
door that can be opened by pulling the top lid backwards. The door opens
towards the camera housing for permanent accessability even in tight
spaces or on special rigs. Make sure the door is always closed to prevent
moisture and dirt from entering the camera!
The cards are inserted with the card contacts first and the SxS labeled side
outwards. They have to be pushed inwards against a spring until they lock in
place. Make sure the cards are locked before closing the door, or the cards
could be damaged.
Note: Do not force the cards into the slots in the wrong direction. This could cause