5-10 Onboard Indicators - Supero SUPERSERVER 2026T-6RFT+ User Manual

5-10 Onboard Indicators

LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
Gigabit LAN port, one LED indicates
activity when blinking while the other
LED may be green, amber or off to
indicate the speed of the connection.
See the table on the right for the func-
tions associated with the connection
speed LED.
Dedicated IPMI LAN LEDs
In addition to LAN1 and LAN2, a dedi-
cated IPMI LAN is located on the I/O
backpanel. The amber LED indicates
activity, while the Link LED indicates
the speed of the connection. See the
tables at right for more information.
LE1
An Onboard Power LED is located at
LE1 on the serverboard. When this
LED is lit the system is on. Be sure
to turn off the system and unplug the
power cord before removing or install-
ing components. See the table at right
for more information.
UID LED
The rear UID LED is located at the
I/O backplane. This LED is used in
conjunction with the rear UID switch to
provide easy identifi cation of a system
that might be in need of service.
Chapter 5: Advanced Serverboard Setup
Activity LED
LAN LED
Connection Speed Indicator
LED Color Defi nition
Off No connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
Link LED
IPMI LAN Activity Indicator
Color Status
Amber Flashing
IPMI LAN Indicator
LED Color Defi nition
Off No Connection or 10 Mb/s
Green 100 Mb/s
Onboard PWR LED Indicator
LED Color Defi nition
Off System Off/Power cable
not connected
Green System On
UID LED
Color/State OS
Blue: On Windows
Blue: Linux
Blinking
5-25
Link LED
Activity LED
Defi nition
Active
Status
Unit Identifi ed
Unit Identifi ed