Checking Clip Properties; Locking (Write-Protecting) Clips; Thumbnail Screen - Sony PDW-700 Operation Manual

After pressing the RESET/RETURN button
to return to the clip thumbnail screen, check
to make sure that the newly selected frame is
displayed as the index picture.

Checking clip properties

You can check clip properties such as the title,
timecode, duration, date and time of creation, and
date and time of the more recent modification.
See page 90 for more information about thumbnail
screen operations.
1
Display the Thumbnail Menu in the clip

thumbnail screen.

2
Select Clip Properties.
The Clip Properties screen appears.
Clip Properties
Clip No. 001/035
Name TèlèvisionLCD
Title Capping Literally years of specu...
Title2 Rétroprpjecteurs BRAVIA
TC 00:23:00:25
DUR 0:00:09:22
Created 30 NOV 2005 13:35±00:00
Modified 20 MAY 2006 15:02±00:00
Rec Device PDW-700(SN-10001)
Clip No.: Clip number/total number of clips
1)
Name: Clip name
Title: Title
1)
Title2: Title 2
TC: Timecode of first frame
DUR: Recording time
Created: Date and time of creation
Modified: Date and time of most recent
modification
Rec Device: Name of device that created clip
(product number)
1) Titles can be displayed in European languages
when the area of use (see page 37) is set to
"NTSC AREA" or "PAL AREA".
To display the properties of the previous
or the next clip
Press the PREV button or the NEXT button.
To return to the clip thumbnail screen
Press the SET/S.SEL button or the MENU
knob.

Locking (write-protecting) clips

In a clip thumbnail screen, you can lock the
selected clips so that they cannot be deleted or
altered.
Locking prevents the following operations on
clips.
• Deletion
• Renaming by FTP
• Changing the index picture
• Adding and deleting shot marks
Notes
• Locked clips are deleted along with other clips when a
disc is formatted.
• Clips cannot be locked or unlocked when the write
inhibit tab of the disc is set to the recording disabled
position.
To lock clips
OK
See page 90 for more information about thumbnail
screen operations.
1
In the clip thumbnail screen, select the
thumbnails of the clips that you want to
lock.
2
Display the Thumbnail Menu.
3
Select Lock/Unlock Clip.
4
Press the SET/S.SEL button or the
MENU knob.
A lock icon (see page 86) appears on the
thumbnail of the locked clips.
In step 1, you can also perform a shortcut
operation by pressing the STOP button with the
SHIFT button held down.
To lock all clips
1
Display the Disc Menu.
2
Select "Lock or Delete All Clips", and
then select "Lock All Clips".
A message appears asking you to confirm
locking all clips.
3
Select OK to lock all clips or Cancel to
cancel it, and then press the SET/S.SEL
button or the MENU knob.
Thumbnail Operations 95