Bar Code - Brother P-touch 7500 User Manual

Error Message
VALUE OUT OF
RANGE!

BAR CODE

TOO LONG!
OK TO REDUCE
THE BLOCK NO.?
BLOCK NO. CHANGE
CLEAR TEXT?
80
Cause
• This message appears if the
value entered while setting
the Margin, Length, and
Block Length function is not
within the allowable range.
• This message appears if the
specified characters cannot
be found in the database.
• This message appears if the
values for the blocks,
records or fields to be
printed is not within the
allowable range.
• The message appears if the
length of the bar code is
longer than 22 cm when
pressing p.
• The message appears if you
select the PANEL2 Label
Type mode, and when the
number of the desired blocks
is less than that of the text
mode, the number is reduced.
• The message appears when
changing from a different
Label Type mode to the
PANEL2 Label Type mode
and the current block number
is different from the
previously used block
number.
Solution
• Type in a value that is within
the allowable range.
• Reduce the width of the bar
code.
• Press n to reduce.
Press b to set the same or
the more numbers of the
blocks.
• Press n to use the
PANEL2 Label Type mode.
All text is cleared.
• Press b to select a
different Label Type mode.