ZyXEL Communications ZyAIR G-4100 Quick Start Manual page 15

802.11g wireless hotspot gateway
Hide thumbs Also See for ZyAIR G-4100:
Table of Contents

Advertisement

Figure 12 Billing Setup
Select a time period (minutes, hours, or days) and enter the time unit in the field provided to define each
"profile's" maximum Internet access time.
Click Next to continue.
6. Use the next wizard screens to set up the ZyAIR to use either an "exclusive printer" to generate
and print subscriber statements or generate them in the web configurator and print them from
there. An "exclusive printer" attaches directly to the ZyAIR. It can have the ZyAIR generate
subscriber statements and then print them.
ZyAIR G-4100
Select Time to Finish to allow subscribers a
one-time login. Once a subscriber logs in, the
system starts counting down the pre-defined
usage even if the subscriber stops the Internet
access before the time period finishes. If a
subscriber logs out before the allocated time
expires, the subscriber does not have to enter
the user name and password to access the
Internet again.
Select Accumulation to allow each
subscriber multiple re-login until the time
allocated is used up. If a subscriber logs out
and accesses the Internet again within the
time period specified in the Idle Timeout field,
the subscriber does not have to enter the user
name and password again to log in.
Enter the appropriate currency unit or
currency symbol. Define the number of
decimal places (up to 3) to be used for billing.
Enter a name (up to 12 characters) for each
billing profile.
Set the duration of each billing period. When
this period expires, the subscriber's access
will be stopped.
15

Advertisement

Table of Contents
loading

Table of Contents