Electrical Connection (3-Wire); Leveling/Adjustments/Alignment - Viking 7 Series Installation Manual

Installation
Electrical Connection (4-wire)
7
1 1
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.

Leveling/Adjustments/Alignment

1
Measure the four corners in cutout area to verify if For uneven or sloped floors, level unit with metal shims
flooring is level.
20
(cont.)
8
Reattach access door.
2
only, as the adjustment required may exceed
the thread available in the legs.
Installation
Leveling/Adjustments/Alignment (
3
Move unit into opening.
side and front to back. Side trim of the lowest corner
5
If leveling is required, move unit out of opening.
7
Set the high corner of range so that the top of side trim is
3/8" (0.95 cm) above countertop. Level range to high corner.
21
)
con't
4
" " "
3 / 8 3 / 8 3 / 8
) ) )
c m c m c m
9 5 9 5 9 5
( 0 . ( 0 . ( 0 .
Check that unit is level side to
must be 3/8" (0.95 cm) above countertop.
6
1
1
Lift unit and prop on wood blocks.