Mitsubishi 2010 Fuso FE Owner's Manual page 211

12-54
Simple inspection and service
<Crew-cab models>
1. Place a can under the engine drain plug
a can under the radiator drain cock
the coolant.
Z19695
2. Remove the cap from the reservoir tank
3. Tilt the cab.
If the vehicle is a Crew-cab model vehicle,
uncover the engine inspection opening.
4. Remove the pressure cap
terclockwise.
5. Open engine drain plug and radiator drain cock
to drain the coolant. Also drain the coolant in
reservoir tank.
NOTE:
By connecting an appropriate hose (of 12 mm {0.47
in.} inside diameter, commercially available) to the
drain cock nipple
out it splashing.
6. After the coolant has been completely drained,
close both engine drain plug and radiator drain
cock.
Engine drain
Z17785
plug
Radiator drain
cock
by turning it coun-
, you can drain the coolant with-
Tightening torque
24.5 ± 4.9 N·m (18.1 ± 3.6 ft.lbs.,
2.5 ± 0.5 kgf·m)
1.5 ± 0.3 N·m (1.1 ± 0.2 ft.lbs.,
0.15 ± 0.03 kgf·m)
and
to receive
.
P. 12-5
P. 12-4