Engine Oil Consumption - Mercedes-Benz CL 55 AMG Operator's Manual

Instruments
Operation
and controls
Engine oil level indicator
One of the following messages will subsequently appear
on the indicator:
"ENGINE OIL LEVEL – O.K."
No oil needs to be added.
"ENGINE OIL LEVEL – ADD 1.0 QUART"
(Canada: 1.0 L)
"ENGINE OIL LEVEL – ADD 1.5 QUART"
(Canada: 1.5 L)
"ENGINE OIL LEVEL – ADD 2.0 QUART"
(Canada: 2.0 L)
See "Checking engine oil level", on page 337 for
instructions on adding engine oil.
"ENGINE OIL LEVEL – REDUCE OIL LEVEL"
Do not overfill the engine.
Excessive oil must be siphoned or drained off. It could
cause damage to the engine and catalytic converter not
covered by the Mercedes-Benz Limited Warranty.
The "MEASURING NOT POSSIBLE!" message will be
displayed if a proper oil level check cannot be
performed. The engine oil level check can be repeated
after a short while.
Instrument
Driving
cluster display
Practical hints Car care
158
CL 500 and CL 55 AMG only:
Perform the engine oil level check with the dipstick, if it
cannot be completed via the multifunction display.
See "Checking engine oil level", page 337.
In this case we recommend that you have the system
checked at a Mercedes-Benz Center.
Notes:
See malfunction and warning messages on page 303
and page 320 if an engine oil level indicator appears on
the multifunction display when the engine is running.
The engine oil level cannot be checked while the engine
is running. The "ENGINE OIL LEVEL – NOT WHEN
ENGINE ON" message will appear.

Engine oil consumption

Engine oil consumption checks should only be made
after the break-in period. During the break-in period,
higher oil consumption may be noticed and is normal.
Frequent driving at high engine speeds results in
increased consumption.
Technical
Index
data