Mercedes-Benz CL 55 AMG Operator's Manual page 115

Instruments
Operation
and controls
Memory function
Storing positions into memory
Driver's seat: with the electronic key in starter switch
position 1 or 2 or with the driver's door open.
Front passenger seat: with electronic key in starter
switch position 1 or 2 or the passenger door open.
Adjust the seat and multicontour backrest to the desired
position. You can also adjust the steering wheel, the
exterior rear view mirrors electrically and the inside
rear view mirror by hand for the driver's seat. See
page 67 for front seat adjustment, page 107 for exterior
rear view mirror adjustment and page 105 for steering
wheel adjustment.
Push memory button "M", release and push a stored
position button "1"," 2" or "3" within 3 seconds.
Recalling positions from memory
To recall a seat/steering wheel/rear view mirror
position, push and hold button "1", "2" or "3" until seat,
steering wheel and rear view mirror movement has
stopped.
The seat /steering wheel/rear view mirror movement
stops when the button is released.
Instrument
Driving
cluster display
Practical hints Car care
112
Caution!
Do not operate the power seats using the memory
button if the backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
First move backrest to an upright position.
Important!
Prior to operating the vehicle, the driver should check
and adjust if necessary the seat height, seat position
fore and aft, and backrest angle to insure adequate
control, reach and comfort. The head restraint should
also be adjusted for proper height. See also airbag
section for proper seat positioning.
In addition, also adjust the steering wheel to ensure
adequate control, reach, operation and comfort. Both the
inside and outside rear view mirrors should be adjusted
for adequate rearward vision.
Fasten seat belts. Infants and small children should be
seated in a properly secured restraint system that
complies with U.S. Federal Motor Vehicle Safety
Standard 213 and Canadian Motor Vehicle Safety
Standard 213.
Technical
Index
data