Removal Of 2K Input Board; Removal Of Power Board; Removal Of Exterior Chassis; Removal Of F_A-Board - Panasonic TH-152UX1 Service Manual

TH-152UX1 / TH-152UX1W / TH-152UX1C
2. Remove 2 screws (K) and then remove the LVDS Output
Board (Lower).

9.34. Removal of 2K Input Board

1. Remove the Front End Block.
(Refer to Removal of Front End Block)
2. Remove 2 screws (M) and then remove the 2K Input
Board.

9.35. Removal of Power Board

1. Remove the Front End Block.
(Refer to Removal of Front End Block)
2. Remove 2 screws (P) and then remove the Power Board.

9.36. Removal of Exterior Chassis

1. Remove the Front End Block.
(Refer to Removal of Front End Block)
2. Remove the 4K Input Board (Upper).
(Refer to Removal of 4K Input Board (Upper))
3. Remove the 4K Input Board (Lower).
(Refer to Removal of 4K Input Board (Lower))
4. Remove the LVDS Output Board (Upper).
(Refer to Removal of LVDS Output Board (Upper))
5. Remove the LVDS Output Board (Lower).
(Refer to Removal of LVDS Output Board (Lower))
6. Remove the 2K Input Board.
(Refer to Removal of 2K Input Board )
7. Remove the Power Board.
(Refer to Removal of Power Board)
8. After removal of six boards by above step 2 to 7, there
remained Metal Box with Center Connection Board which
named Exterior Chassis.

9.37. Removal of F_A-Board

1. Remove the Front End Block.
(Refer to Removal of Front End Block)
2. Disconnect the connectors (AF1, AF9).
3. Remove 5 screws and then remove F_A-Board.

9.38. Removal of F2-Board

1. Remove the Front End Block.
(Refer to Removal of Front End Block)
2. Disconnect the connectors (F20, F21, F22, F23, F25,
F26, F27, F28, F29).
3. Remove 5 screws and then remove F2-Board.
38