Ms Mode - Panasonic TH-152UX1 Service Manual

SOS History
SOS History (Number of LED blinking) indication.
From left side; Last SOS, befor Last, three occurrence befor,2nd occurrence affter shipment, 1st occurrence after shipment.
This indication will be cleared by [Self-check indication and forced to factory shipment setting].
To exit the CD mode, press the RETURN button on the remote control.
6.1.3. SD mode
Select the SD mode by Up/Down button on the remote control at the front page of CAT mode and then press the OK button on the
remote control.
To exit the SD mode, press the RETURN button on the remote control.
6.1.4.

MS mode

Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and then press the [5] button on the
remote control more than 3 seconds.
To exit the MS mode, press the RETURN button on the remote control.
Caution:
Market Select should be set [7] for model TH-152UX1 / UX1W / UX1C after exchange of A-Board.
TH-152UX1 / TH-152UX1W / TH-152UX1C
15