Changing The Default Code; Allow/Prevent The Sharing Of A Call With Another Handset; The Handset; Associating A New Handset - SAGEMCOM D380 User Manual

D380-D380A

Changing the default code

Menu > SETTINGS
Enter the old and then the new code and confirm.
Allow/Prevent the sharing of a call with another
handset
Notes If you disable the intrusion mode, you will not be able to share a
call in process with another handset.
Menu > SETTINGS
Follow the instructions on the screen and confirm.

The handset

Associating a new handset

Your phone allows you to associate other handsets with the base. You then have to
page/pair them so that they are recognized.
Menu > SETTINGS
F
ROM THE HANDSET
1 Enable the function.
F :
ROM THE BASE
2 Enabling the paging mode.
Refer to section
Once the handset is registered, the paging mode is automatically exited.
> ADVANCED SET. >
> ADVANCED SET. >
> ADVANCED SET. >
:
"Enabling the paging
41
CHANGE CODE
SET BASE > INTRUSION
SET HANDSET > REGISTRATION
mode", page 44.