Charging - SAGEMCOM D380 User Manual

Hide thumbs Also See for D380:
Table of Contents

Advertisement

D380-D380A

Charging

To charge your phone, place the handset on the base, making sure that the base is
connected to an AC outlet.
The battery charging icon
display stops moving when the batteries are charged.
Notes
To ensure optimum charging, leave the handset on the base for at
least 15 hours when using the phone for the first time. During
charging, the batteries may heat up. This is quite normal and perfectly
safe.
If you do not obtain radio contact with your base, check the electrical
connections to your base.
B
ATTERY REPLACEMENT
1
Turn off the handset. Turn it over to access the battery compartment hatch.
2
Remove the battery compartment hatch.
3
Remove the old batteries, insert the new batteries one by one the right way as
indicated by their polarities.
4
Refit the battery compartment hatch.
Notes
Worn out batteries should be discarded in accordance with the
recycling instructions given in chapter
instructions", page 2.
CAUTION
moves to inform you that charging is in progress. The icon
To prevent damage to your handset, only use approved AAA
format NiMH 1.2 V 650 mAh rechargeable type batteries. Never
use No-rechargeable batteries.
"Recommendations and safety
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

D380a

Table of Contents