Advertisement
Available languages
Available languages
lowest intensity while "BRT4" is the brightest. Simply press the MODE button until the desired brightness setting is
displayed and select by pressing and releasing the POWER button.
There are two ARC™ (Angle Range Compensation) modes and one REGULAR mode. The two ARC™ modes are
BOW mode ( ) and RIFLE mode (
).
To select between these modes, first turn the unit "ON" by pressing and releasing the POWER button. Next, press and
hold the MODE button for three seconds to get into the SETUP menu. The brightness is displayed first and can be
changed by pressing the MODE button or accepted by pressing the POWER button. Then press the power button until
you see the existing compensation mode indicated by either the "Bow" symbol ( ), the "Rifle" symbol (
) lit with
one of the ballistic groups (A thru J) displayed and flashing, or no indicators lit and the message (
) flashing.
The modes can be cycled through in a circular fashion by pressing and releasing the mode button. The order of modes is
a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I, RIFLE
J, REG, etc. When the bow selection is displayed, ( ) will flash and when the rifle selection is displayed, (
)
and ballistic group will be flashing. When the (
) is displayed, the message (
) will flash within the display.
Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER
button. Following this selection, the current unit of measure, "Y" for yards or "M" for meters will flash
in the display and the SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure.
When the desired unit of measure is displayed, press the POWER button to accept the unit of measure.
If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:
1. Variable Sight-In (VSI™) - Allows the rifle hunter to choose from four sight-in distances (100, 150, 200, or 300
yards or meters) and provides holdover / bullet-drop data in inches, centimeters, MOA, or ML (mil). The "SD" (Sight-
12
Hide quick links:
Advertisement
