Backplane - ASROCK 1U12LX Series User Manual

3.6 Backplane

Each barebone system supports three 3.5-inch HDD backplanes. he miniSAS/
SATA backplanes serve as the interfaces between the server board and the HDDs.
Before removing and installing the backplanes, power of the server and unplug the power
cord and make sure all 3.5" HDDs have been removed.
For the speciication of the backplane, please refer to the Chapter 4.
Removing the Backplanes
1. Remove all of cables connected to the backplanes.
2. Loosen the securing screws on the backplanes.
3. Lit the backplanes up from the chassis. Hold the backplanes only by the edges.
24