Add-In Card - ASROCK 1U12LX Series User Manual

3.4 Add-In Card

1. You can install an add-in card to the chassis only when you have a riser card to be
installed on the server board.
2. Before installing the riser card, be sure to remove the 2.5" HDD carrier irst.
3. Before installing the add-on card, power of the server and unplug the power cord.
Installing an add-in card
1. Remove the screw securing the add-in card assembly on the chassis. Keep this screw for
later use.
2. Lit up and remove the add-in card assembly from the chassis.
3. Slide the add-in card iller plate out sideways.
Add-in Card Assembly
2
3
Filler Plate
1U12LX Series
1
21