No matter how intensive your network demands, the Linksys 24-Port 10/100 + 2-Port Gigabit Switch + 2 miniGBIC has speed, flexibility, and reliability that you can count on.
Switch + 2 miniGBIC Front Panel LEDs and Ports Figure 2-1 The LEDs and network ports are located on the front panel of the Switch. All network ports are independent, so you can use all of them simultaneously. LEDS System Green.
4. Repeat steps 2 and 3 to connect additional devices. 5. If you are using a Gigabit port, connect a Category 5e Ethernet network cable to a Gigabit port on the Switch, and connect the other end to a Gigabit server or other network device.
1000Base-T are the same as those used for 100BaseT. Category 5 link lengths are limited to 100 meters by the ANSI/TIA/EIA-568-A cabling standard. Auto MDI/MDI-X - On a network hub or switch, an auto MDI/MDI-X port automatically senses if it needs to act as a MDI or MDI-X port. The auto- MDI/MDI-X capability eliminates the need for crossover cables.
MDI (Medium Dependent Interface) - On a network hub or switch, a MDI port, also known as an uplink port, connects to another hub or switch using a straight- through cable. To connect a MDI port to a computer, use a crossover cable.
This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident.
Page 9
EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recy- cling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:...
Can't find information about a product you want to buy on the web? Do you want to know more about networking with Linksys products? Give our advice line a call at: Or fax your request in to: If you experience problems...