Yamaha PSR-S670 Owner's Manual page 26

Saving a File
You can save your original data (such as Songs you've recorded) as a file to USER or the USB drive in the File
Selection display (page 24).
1
In the File Selection display, select the appropriate tab (USER or
USB) to which you want to save the data by using the TAB
[E][F] buttons.
If you want to save the data within an existing folder, also select the folder here.
2
Make sure that MENU 2 is shown at the bottom right corner of
the display.
If MENU 1 is shown on the display, press the [8 ] button to call up MENU 2.
(Press the [8 ] button to toggle between the two.)
3
Press the [6 ] (SAVE) button.
The Character Entry window is called up.
4
Enter the file name (page 30).
Even if you skip this step, you can rename the file at any time after saving it
(page 28).
5
Press the [8 ] (OK) button to actually save the file.
If the file name already exists, a message appears asking you if you want to
overwrite or not. If not, press one of the [6 ] (NO) buttons and enter
another name.
The saved file will be automatically located at the appropriate position among
the files in alphabetical order.
26
PSR-S670 Owner's Manual
3
NOTE
Files cannot be saved to the PRESET
tab or the "Expansion" folder (page 44)
in the USER tab.
NOTE
To cancel the Save operation, press the
[8 ] (CANCEL) button before step 5
below.
NOTE
In the USER tab, the maximum total
number of files which can be stored
differs depending on the file size and
the length of the file names.