Sharp Aquos LC-65UB30U User Manual page 36

>>
On-Screen Display Menu
<<
Example
Initial Setup (Continue)
TV Channel Setup
CH Setup (Channel Setup)
If Initial Installation does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all
channels viewable in the set area.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using CH
.)
/
Off: Does not skip channels. (Channel selection enabled
using CH .)
/
NOTE
See Initial Installation on
pages 2-2 to 2-7 for setting each item.
If no channel is found, confirm the type of connection
made with your TV and try channel search again.
If you select "Analog Search Start" and initiate the
channel search, the CH Memory for Cable Digital will be
deleted.
ENG 4-6
Favorite CH (Favorite Channel Setting)
This function allows you to program 4 favorite channels, in 4
different categories. By setting the favorite channels in
advance, you can select your favorite channels easily.
To register your favorite channel:
Sselect the channel you want to register as a favorite
channel. Then select "Register" and press ENTER. Press
/ / / to select the position in the category, and then
press ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press / / /
to select the channel you want to delete, and then
press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
NOTE
You can automatically switch to your registered favorite
channel by pressing Color (Red/Green/Blue/Yellow)
button on the remote control.