Sharp Aquos LC-65UB30U User Manual page 15

>>
Watching TV
<<
Initial Installation (Continue)
Connection using an ETHERNET cable:
Select "Wired" and press ENTER.
Confirm that the TV is properly connected with the
router, and then press "Next". Follow the instructions on
the display to perform the connection test.
Wireless LAN connection by the WPS method:
Select "Wireless" and press ENTER.
Follow the instructions on the display, and finalize the
connection after testing its viability.
NOTE
After you finish configuring the network settings,
proceed with the following:
set the TV name. (See page 4-29.)
enable/disable the smartphone remote application
(installed in your portable device) to control your TV.
view/configure the security settings.
When you change the network settings, refer to Smart
TV > Internet Setup.
(See pages 7-2 to 7-4.)
Completed
11 The settings confirmation screen is displayed. If you
enable the remote application installed in your portable
device (Android or Apple OS) to control your TV, you
can directly configure the SmartCentral settings.
Press / to select "Yes", and then press ENTER to
enter the SmartCentral homescreen.
Press / to select "No", and then press ENTER to
complete the Easy Setup procedure.
ENG 2-6
Examples of the settings confirmation screen
When "Antenna & Cable" was selected in step 6.
NOTE
If no channel is found, confirm the type of connection
made with your TV and try "Easy Setup" again.
(See page 4-5.)