Figure 6-4: Netbeui - Linksys PSUS4 User Manual

PrintServer for USB with 4-Port Switch
The Protocol Tab - NetBEUI
NetBEUI connection settings of the PrintServer are available on this tab. (See Figure 6-4.)
Domain Name. Enter the name of the domain that you want the PrintServer associated with in the Domain Name
field.
If you are unsure of the Domain Name, you can find it out by looking on any computer already on the network. In
Windows 98, right click Network Neighborhood and select Properties. Under the Identification tab, there will be
listed that computer's name, and the Domain to which it is connected. For Windows Me and 2000, right click My
Network Places. In Windows Me, choose Properties from the menu that appears. In Windows 2000 or XP, choose
Properties from the menu that appears. Then, right click Local Area Connection and choose Properties. The Domain
name will appear. If you want the PrintServer to be connected to that same Domain, enter that Domain name here.
If no Domain name exists there, you will use the Workgroup name from that window.

Figure 6-4: NetBEUI

Options. You can specify the Response Time that you prefer for the PrintServer. This is the amount of time
(measured in seconds) that the PrintServer will wait for a response from the network before "timing out."
You also have the option to Abort Print Job if Error. Selecting Yes here will terminate the printing if there is an error
of any kind. If you select No, print jobs that have errors will be sent to the printer, but might not print properly.
Change these settings as described here and click the Save button to apply your changes or click Cancel to
cancel your changes.
Chapter 6: Configuring the PrintServer 18
The Protocol Tab - TCP/IP