Digital Certificate Installation - Linksys WRT51AB User Manual

8. Click the Wireless Network Connection icon located in your computer's
system tray.
9. Complete the User name and Password fields. Complete the Logon domain
field if necessary. Then click the OK button.
10. Open your PC's web browser and test your Internet connection. If you are
unable to connect to the Internet, double-check the settings you configured
through Windows XP and the Router's web-based utility.
For more details about wireless networking or 802.1x on a Windows XP com-
puter, enter the keyword wireless or 802.1x in the Windows XP search engine.
96
Instant Wireless
Figure C-9
Figure C-10
Series Dual-Band Wireless A+B Broadband Router
®

Digital Certificate Installation

Before accessing the wireless network, you must have a digital certificate
installed on your PC. Proceed to step 1 for instructions on how to request a dig-
ital certificate from a Windows 2000 RADIUS server through the Internet. If
you need to request a digital certificate using a different method, contact your
network administrator. If you already have a certificate installed, proceed to the
"TLS Authentication for Windows XP" section.
1. Open your PC's web browser. In the Address field, enter http:\\IP address
of the RADIUS server\certsrv. For example, if the IP address of the
RADIUS server is 10.10.10.2, then enter http:\\10.10.10.2\certsrv.
2. Complete the User name and Password fields. Then click the OK button.
Important: Before you install the digital certificate, make sure you
have the IP address, User name, and Password for the RADIUS server
of the wireless network. If you need any of this information, contact
your network administrator beforehand.
Important: To request a digital certificate from a Windows 2000
RADIUS server, you must use an active Internet connection.
Figure C-11
Figure C-12
97