Linksys WRT51AB User Manual page 55

3. Click the Authentication tab. Make sure the box next to Enable network
access control using IEEE 802.1X is checked. In the drop-down box next
to EAP type, select Smart Card or other Certificate. Make sure the box
next to Authenticate as computer when computer information is avail-
able is checked. Then click the OK button.
4. Click the Wireless Networks tab. Select the wireless network you want to
connect to, and click the Configure button.
102
Instant Wireless
Figure C-21
Figure C-22
Series Dual-Band Wireless A+B Broadband Router
®
5. Make sure the box next to Data encryption (WEP enabled) is checked.
Make sure the box next to The key is provided for me automatically is
checked. Then click the OK button.
6. Make sure the appropriate network is selected, and click the OK button.
Figure C-23
Figure C-24
103