Battery Operation Using Rechargeable Batteries - Sangean ATS-405 Manual

Battery operation using rechargeable
batteries
. Remove the battery cover on the back of the unit by
sliding the cover in the direction of the arrow.
2. Slide the CHARGE switch located in the bottom side
of radio to ON position.
3. Insert four Rechargeable UM-3 (AA size, LR6) batteries
into the battery compartment. Take care to ensure all
batteries are inserted with the correct polarity as shown
on the back of the radio. The radio is designed to be
used with Nickel Metal Hydride (NiMH) rechargeable
batteries.
4. Plug the mains adaptor into your radio and then plug
the adaptor into the mains.
5. The battery charging LED will flash red indicating
batteries are charging. Batteries will be fully charged
in around 7 hours depending on battery capacity. The
charge LED shows a steady red when the battery
charging is completed.
● Important:
when using rechargeable batteries the battery
switch must be placed in the ON position.
GB