Remote Control Battery Replacement - Sangean WR-2 Instruction Manual

Remote control battery replacement

. Open the battery holder by pulling
the holder out in direction shown.
2. Remove battery from holder.
3. Replace battery (CR2025 or equivalent)
ensuring that the positive side of the
battery faces you with holder positioned
as shown.
4. Replace the battery holder.
IMPORTANT:
The batteries should not be exposed to excessive heat such as
sunshine, fire or the like. After use, disposable batteries should if
possible be taken to a suitable recycling center. On no account
should batteries be disposed of by incineration.
Warning
KEEP OUT OF REACH OF CHILDREN
[The remote control supplied with] This product contains a coin/
button cell battery. Swallowing may lead to serious injury or death.
Severe burns can occur within 2 hours of ingestion.
Keep batteries out of reach of small children. Coin cell batteries can
be accidentally ingested. If ingested, these batteries may leak harmful
contents causing chemical burns, perforation of soft tissue, and in
severe cases may cause death. Coin batteries must be removed
immediately if swallowed. Seek medical attention immediately, if you
or your doctor suspects that a battery has been ingested.
GB
8