Specifications - OWI AMP-BT-602-1 User Manual

OWI User Manual: Model AMP-BT-602-1 Speaker Amplifier
BLUETOOTH

SPECIFICATIONS

ELECTRICAL AMPLIFIER
Input voltage, nominal
Input current, opera ting (15VDC)
Input volt-amperes, peak (15VDC)
Input voltage, maximum
Frequency Response,
EQ set to flat
Bass
Treble
THD + Noise
S/N
Max Power Output (28V in)
DC Power, Standby
AC Power, Sleep Mode (Energy Star)
DC Power,
Short Circuit protected
Over current protected
Over voltage protected
Over temperature protected
Minimum Load Impedance
Minimum Input impedance, Priority in
Minimum Input impedance, Bal. Line in
Minimum Input impedance, mini-jack
Dynamic Mic input impedance
Warranty
POWER SUPPLY
PS15VDC35AL5
Input
Output
Wire gauge and length
Electrical, Power Supply
Weight
Size
CAUTION: The Power Supply is not to be used in air handling spaces.
*Note: Maximum power requires the replacement of the 15 volt supply with a 22 volt supply and Energy Star and
UL approvals no longer apply.
Power Supply Wire Gauge and Length - Minimum 18 gauge up to 40 feet maximum length
OWI INC.
SPECIFICATIONS (AMP-BT-602-1)
AMP-BT-602-1
Certified SIG Bluetooth Version 3.0
Frequency Range 2.40 – 2.48 MHz
Supports A2DP, AVRCP, HFP/HSP and SPP
Password Protected
100 to 240 VAC, 50-60 Hz, 1.4A
Note: Be sure to use the correct polarity on the power input.
15 VDC, 3.5 amperes
Minimum 18 gauge up to 40 feet maximum length
UL Listed, Level 5 (Energy Star)
0.45 pounds
4.7"H x 2"W x 1.2"D
7
AMP-BT-602-1
(25 watts) 15 volts DC
1.667 amperes peak
25 volt-amperes
16.5 volts, DC
50Hz to 15 kHz
±10dB@50Hz
±10dB@10kHz
<1% at 15 watts, "A" weighted
>90 dB
2 times 20 watts or a total of 40 watts
1.5 watts
less than 1 watt
Yes
Yes
Yes
Yes
4.0 Ω (Two 8 Ω Speakers in parallel)
20,000 Ω
820 Ω
2300 Ω
300 Ω
1 year
SPECIFICATIONS
www.owi-inc.com