Status > Router; Status > Local Network - Linksys RangePlus WRT100 User Manual

Chapter3
NOTE: The Router may lose the settings you
have customized. Before you upgrade its
firmware, write down all of your custom settings.
After you upgrade its firmware, you will have to
re-enter all of your configuration settings.
Upgrade Firmware
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Please select a Fle to Upgrade
the extracted firmware upgrade file.
Start to Upgrade
After you have selected the
appropriate file, click this button, and follow the on-screen
instructions.
Status > Router
The Router screen displays information about the Router
and its current settings.
Status > Router
Router Information
Frmware Verson
This is the version number of the
Router's current firmware.
Current Tme This shows the time set on the Router.
Internet MAC Address This is the Router's MAC Address,
as seen by your ISP.
Host Name
If required by your ISP, this was entered on
the Basic Setup screen.
Doman Name
If required by your ISP, this was entered
on the Basic Setup screen.
RangePlus Wreless Router
Click Browse and select
Advanced Configuration
Internet Connection
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Basic Setup
screen.
Click Refresh to update the on-screen information.
Status > Local Network
The Local Network screen displays information about the
local, wired network.
Status > Local Network
Local Network
Local MAC Address
The MAC address of the Router's
local, wired interface is displayed here.
Router IP Address This shows the Router's IP address, as
it appears on your local network.
Subnet Mask
This shows the Subnet Mask of the Router.
DHCP Server
DHCP Server
The status of the Router's DHCP server
function is displayed here.
Start IP Address
For the range of IP addresses used by
devices on your local network, the starting IP address is
shown here.
End IP Address
For the range of IP addresses used by
devices on your local network, the ending IP address is
shown here.
DHCP Clents Table Click this button to view a list of PCs
that are using the Router as a DHCP server.
23