Charging The Battery; Extending The Battery Life - Zte Obsidian User Manual And Safety Information

NOTE: micro SDHC logo

Charging the Battery

When you get your new phone,
If the battery is low, there will be a pop-up message on the screen. As you charge your phone,
the screen will tell you the exact battery level each time you wake up your phone.
WARNING! Use only ZTE approved chargers and cables. The use of unapproved accessories
could damage your phone or cause the battery to explode.
CAUTION: Do not change the built-in rechargeable battery in your phone by yourself. The battery
can only be changed by ZTE or ZTE auto rose service provider.
1. Connect the adapter to the charging interface. Ensure that the adapter is inserted with the
correct orientation. Do not force the connector into the charging interface.
2. Connect the charger to a standard AC wall outlet.
such as , appear on the status bar.
3. Disconnect the charger when the battery is fully charged.
NOTE: If the battery is extremely low, you may be unable to power on the phone even when it
is being charged. In this case, try again after charging the phone for at least 10 minutes.
Contact customer service if you still cannot power on the phone after prolonged charging.

Extending the Battery Life

Active applications, screen brightness levels, Wi-Fi usage and GPS functionality and other
certain features can all drain your battery. You can follow the helpful tips below to conserve your
battery power:
Reduce the screen backlight time.
Lower the screen brightness.
Turn auto-sync, Mobile HotSpot, Wi-Fi, and Bluetooth off when not in use.
Disable the GPS function when not in use. Most applications using this function will
periodically query the GPS satellites for your current location; each query drains your battery.
is a trademark of SD-3C, LLC.
12
a charging icon,