Figure 7-19: Configuration - Snmp - Linksys WPS54GU2 User Manual

Wireless-G PrintServer for USB 2.0
SNMP (Figure 8-19)
• SysContact. Enter the name of the contact person in the SysContact field.
• SysLocation. Enter the location of the contact person in the SysLocation field.
• Configuration Item. From the Configuration Item box, select the number of the management station (M1-
M4) or trap receiver (T1-T4). The selected item's information will be displayed below.
For management stations, you can change the station's IP address, Community String, and Access
Permission level. In the Manager IP Address fields, enter the IP address of the management station with
the SNMP program installed. In the Community String field, enter the name of the SNMP community,
which is usually public or private. In the Access Permission section, select the desired level of access for
this management station, Read Only, Read/Write, or Not Accessible.
For trap receivers, you can change the trap receiver's IP address, Community String, Trap Option, and
Trap Severity level. In the Trap Receive IP Address fields, enter the IP address of the trap receiver that will
be sent the trap messages or notifications. In the Community String field, enter the name of the SNMP
community, which is usually public or private. For the Trap Option setting, select Enable or Disable. For
the Trap Severity setting, select the desired level of severity, with 1 meaning least severe.
Click the Get Defaults button if you want to cancel your changes and use the default settings.
When finished making your changes on this tab, click the OK button to save these changes, or click the
Cancel button to undo your changes. For more information, click the Help button.
Chapter 8: Bi-Admin Management
The Bi-Admin Management Utility

Figure 7-19: Configuration - SNMP

40