Connecting To Your Tv Only - Linksys WMA11B User Manual

2. Do one of the following:
Connect the S-video cable to the Adapter's S-video port and the TV's
S-video in port.
Connect the yellow RCA connectors of the audio/video cable to the
Adapter's Video port and the TV's Video in port.
3. Use the color-coded audio/video cable to connect the Adapter's Left and
Right ports to the stereo's Audio in ports.
4. On your TV, select the input that matches the connection to the Adapter.
5. On your stereo, select the input that matches the connection to the Adapter.
6. Power on the Adapter. The main menu of the Media Navigator will appear
on your TV.
Proceed to the "Placement Options" section.
24
OR

Connecting to Your TV Only

Figure 7-2
1. Power off the Adapter, and move it to your TV. If you are using a wireless
network, make sure the Adapter's antenna is pointing straight up in the air.
If you are using a wired network, make sure the cable connections remain
secure.
2. Do one of the following:
Connect the S-video cable to the Adapter's S-video port and the TV's
S-video in port.
Connect the yellow RCA connectors of the audio/video cable to the
Adapter's Video port and the TV's Video in port.
3. Use the color-coded audio/video cable to connect the Adapter's Left and
Right ports to the stereo's Audio in ports.
4. On your TV, select the input that matches the connection to the Adapter.
5. Power on the Adapter. The main menu of the Media Navigator will appear
on your TV.
Proceed to the "Placement Options" section.
OR
25