Figure 5-3: Connection To Your Tv Only - Linksys WMA11B User Manual

Wireless-B Media Adapter
Connecting to Your TV Only

Figure 5-3: Connection to Your TV Only

1. Refer to the connection diagram in Figure 5-3. If your TV has an S-video input, then connect the S-video cable
to the Adapter's S-video port and the TV's S-VIDEO IN port.
If your TV does NOT have an S-video input, the connect the yellow connectors of the RCA cable to the
Adapter's Video port and the TV's VIDEO IN port.
2. Connect the red and white connectors of the RCA cable to the Adapter's Left and Right ports and the TV's
AUDIO IN ports.
3. Power on your TV. Select the TV channel or input that the Adapter will use.
4. Proceed to the "Connecting the Adapter to Your Network" section.
Connecting the Adapter to Your Network
1. If the Adapter will connect to your computer through your wireless network, go to step 2.
If the Adapter will connect to your PC through your wired network, then connect the Ethernet network cable to
the Adapter's LAN port and an Ethernet (LAN) port on a wired network device, such as a router or switch.
Chapter 5: Connecting the Wireless-B Media Adapter to Your TV and Stereo
Instructions
20