Chapter 7: Connecting The Wireless-B Media Adapter To Your Tv And Stereo; Overview; Connecting To Your Tv And Stereo - Linksys WMA11B User Manual

Wireless-b media adapter
Hide thumbs Also See for WMA11B:
Table of Contents

Advertisement

To remove a folder:
1. From the list of Selected Media Folders, select the folder you want to
remove.
2. Click the Remove button.
3. When you are finished, click the OK button.
Using the Start Menu
To access the Utility, click the Start button. Click All Programs and Linksys
Wireless-B Media Adapter.
You will see three choices: Adapter Utility, Media Folder Manager, and
Uninstall (see Figure 6-9). Click Adapter Utility to restart the Utility. Click
Media Folder Manager to add or remove folders holding music and pictures
(see the "Media Folder Manager" section on the previous page for instruc-
tions). Click Uninstall to remove the Utility from your PC.
Proceed to "Chapter 7: Connecting the Wireless-B Media Adapter to
Your TV and Stereo."
22
Figure 6-9
Chapter 7: Connecting the
Wireless-B Media Adapter to Your
TV and Stereo

Overview

This chapter will explain how to connect the Adapter to your TV (and stereo, if
you have one). It will also describe how to set up the Adapter from the TV if
you do not wish to run the Setup Wizard on a PC.
If you are using a stereo, go to the "Connecting to Your TV and Stereo" section.
If you are not using a stereo, then you will connect your audio cables to your
TV. Go to the "Connecting to Your TV Only" section.

Connecting to Your TV and Stereo

Figure 7-1
1. Power off the Adapter, and move it to your TV. If you are using a wireless
network, make sure the Adapter's antenna is pointing straight up in the air.
If you are using a wired network, make sure the cable connections remain
secure.
23

Advertisement

Table of Contents
loading

Table of Contents