Chapter 7: Using The Wireless-B Ethernet Bridge Web-Based Utility; Overview; Starting The Web-Based Utility; Figure 7-1: Access The Web-Based Utility - Linksys WET11 User Manual

Wireless-b ethernet bridge

Hide thumbs Also See for WET11:

Quick installation (2 pages)

Specifications (2 pages)

Quick start manual (1 page)

Table Of Contents

Table of Contents

Wireless-B Ethernet Bridge

Chapter 7: Using the Wireless-B Ethernet Bridge Web-based

Utility

Overview

The Bridge is designed to function properly after configuration using the Setup Wizard. However, if you would like

to change these settings or make more advanced configuration changes, use your web browser and the

Wireless-B Ethernet Bridge Web-based Utility. This chapter explains how to use the Utility.

Starting the Web-based Utility

1. Open your web browser, and enter the IP address of the Wireless-B Ethernet Bridge (the default is

192.168.1.225). Press the Enter key, and the screen shown in Figure 7-1 will appear. In lowercase letters,

enter the default password, admin, in the Password field. Click the OK button. You can set a new password

on the Password screen later.

2. The Utility's Setup screen, shown in Figure 7-2, will appear.

The Utility provides a convenient, web-browser-based way to alter the Bridge's settings. It offers five main

tabs:

• Setup - Enables you to configure the IP address and wireless settings.

• Password - Allows you to change the password or reset all settings to factory defaults.

• Advanced - Lets you change the advanced wireless settings and clone a MAC address onto the Bridge.

• Status - Displays the Bridge's current settings.

• Help - Provides explanations of various configuration settings and links to online technical support resources.